110+ off-grid autonomous sites
- Equipment
- 48 V gensets as the primary source, 1,000 Ah batteries
- Result
- high altitude and snow, generation partner project
Solution
Microgrids and hybrid power for remote sites
Storage, genset and solar panels in one system under single responsibility. The genset runs short cycles in an efficient mode, and the battery carries the load most of the time.
Key figures
up to 1,000 hours
of genset operation without a service crew visit
manufacturer data60-100 kW
built-in solar input of the 107 kWh cabinet, 3-4 MPPT trackers
manufacturer data6-4,000 kVA
OS Power genset range
manufacturer dataWhat is expensive at an off-grid site
Fuel and delivery
A genset at low load burns fuel inefficiently, and delivering diesel to a remote site costs more than the fuel itself.
Engine hours
Round-the-clock genset operation means frequent service and a short time to overhaul.
Staff visits
Every service visit to a remote site means rotation crews, transport and downtime.
Unstable grid
A weak grid at the end of a line causes dips and outages that stop the site.
Solution
How it works
The energy management system synchronizes the gensets with the storage and the solar plant and monitors fuel, starts and alarms.
- Storage carries the loadThe OS Power battery supplies the site most of the time and smooths peaks.
- Genset runs short cyclesIt starts only to charge the battery in an efficient mode: less fuel, fewer engine hours and site visits.
- Solar cuts fuel consumptionDuring the day the solar plant supplies the load and charges the battery.
- Unified controlThe control system sees all sources and selects the cheapest mode.
- primary source
- backup
- unstable
- not available
The genset starts to charge the battery and runs at efficient load.
Where it is used
| Site | Typical configuration |
|---|---|
| Off-grid base stations and telecom nodes | 48 V genset, solar panels, 48 V modules |
| Mining and oil and gas sites, worker camps | N+1 containerized gensets, storage container, solar plant |
| Remote industrial sites and construction sites | containerized power module, 215-261 kWh cabinets |
| Rural facilities and farms | 107 kWh cabinet with a solar input |
| Backup sites for data centers and critical infrastructure | gensets, busbar storage, monitoring |
Fuel savings depend on the load profile and the share of solar generation; an estimate for your site is available in the hybrid calculator.
Projects using this solution
Data from the group's manufacturers and partners as of 10.2026. Customer names are not published.
Equipment for microgrids
Full catalog
OSP-DGDiesel and gas gensets6-4,000 kVA 
OSP-CI-LFP-107A107 kWh cabinet with solar PV input107.5 kWh 
OSP-CI-NA-115L115 kWh sodium cabinet115 kWh 
OSP-CT-LFP-50165.0 MWh container5.0 MWh 
OSP-TS-MULTIMulti-service cabinet for multiple operators36 kW 
OSP-RES-NA-48160WResidential sodium battery, floor-standing and wall-mounted7.7 kWh Other solutions
Peak shaving and load shifting
Discharging during peak hours lowers billed capacity; charging at night lowers the energy bill.
Learn moreGrid connection without waiting
Storage covers the gap between allocated and required capacity while the grid is being upgraded.
Learn moreGrid-scale storage and renewables
Containers up to 5 MWh for grid companies, solar and wind plants.
Learn moreUPS batteries and data center backup
NFPP sodium batteries instead of lead-acid: hours of backup in the same hall.
Learn moreStorage for telecom
48 V LFP and NFPP modules and integrated cabinets for base stations.
Learn moreRequest
Tell us about your site
Peak and average load, hourly load profile for a year (if available), tariff and price category, site climate and the task: lower electricity costs, backup, grid connection or on-site generation. We will reply with a configuration, an indicative payback and a lead time.