Indoor cabinet
Replaces a shelter inside a building
- W×D×H
- 600 × 600 × 2,000 mm
- Weight
- under 120 kg
- Cooling
- natural
- Cable entry
- top
- Service access
- front
- Protection
- IP20, class B1 indoor rooms
Integrated cabinet - versions
Integrated cabinet versions
From a cabinet inside a building to a multi-operator row and a pole-mounted module. Full specifications, no registration or request needed.
Cabinets and module
Weights exclude rectifier modules and batteries.
All-weather cabinet
Street, rooftop, pole site; single operator
- W×D×H
- 750 × 750 × 2,100 mm, 200 mm plinth
- Weight
- under 210 kg
- Cooling
- 1.5 kW DC air conditioner, up to 2 units, shared by equipment and battery compartments
- Cable entry
- bottom or between cabinets
- Service access
- front and rear
- Noise
- max 65 dB at 1.5 m, +45 °C
- Protection
- IP55, sandwich panels
Multi-service cabinet
Several operators, tower companies, sites up to 36 kW
- W×D×H
- 900 × 1,200 × 2,100 mm, 200 mm plinth
- Weight
- under 430 kg
- Row
- up to 4 cabinets with inter-cabinet cabling and shared cooling
- Cooling
- 2 × 5 kW DC air conditioners, up to 4 with N+1, up to 10 kW per cabinet
- Equipment space
- 31U up to 790 mm deep or 2 × 31U up to 396 mm deep, 19 and 21-inch
- Batteries
- up to 12 modules of 100 Ah in 3U
- Power system
- 36 kW in a 6U shelf, 9 module slots
- Protection
- IP55, foamed enclosure
Pole-mounted power module
Micro and small sites with no ground space
- Power module
- 6 kW, 120 × 300 × 420 mm, about 18 kg
- Battery module
- 3 kW, 50 Ah, about 26 kg
- Mounting
- wall, pole or tower; two people in 30 minutes
- Parallel
- up to 4 power modules and up to 8 battery modules
- Protection
- IP65, natural cooling
- Temperature
- -40 to +55 °C without solar radiation
- Load
- 7 branches of 40 A with per-branch metering and shedding
- System efficiency
- 97 %
Power system: 24-36 kW in 6U
The multi-input power system accepts grid, generator and solar and delivers voltages for different operators’ equipment.
- Capacity
- 24 kW in 6U, up to 36 kW with three-phase input
- Input
- three-phase 85-300 V AC, 45-65 Hz, 100 A breaker, optional dual input with interlock
- DC output
- 42-58 V, rated 53.5 V; 57 V mode for long radio feed lines
- Outputs
- 12, 24, 36, 48, 57 V DC; 24, 220 V AC
- Battery branches
- 6 × 125 A
- Load groups
- primary 4 × 125 A; secondary 2 × 63 A, 2 × 32 A, 2 × 16 A
- Surge protection
- AC 30 kA; DC 10 kA differential, 20 kA common mode
- Rectifier efficiency
- up to 98 % peak
- Service
- front access, 19-inch rack mount, under 30 kg without modules
Cooling for indoor cabinets
For shelters that stay: the cooling unit is built into the door or mounted on the side of the cabinet.
| Version | Cabinet W×D×H, mm | Compressor cooling | Heat pipe cooling | Efficiency |
|---|---|---|---|---|
| Door unit, inverter compressor | 600 × 600 × 2,000 / 600 × 800 × 2,200 | 5.5+ / 11+ kW | - | EER 3.4 |
| Door unit, compressor and heat pipe | 600 × 600 × 2,000 / 600 × 800 × 2,200 | 6+ / 10+ kW | 4+ / 6+ kW | EER 3+, heat pipe 10+ |
| Side unit, compressor and heat pipe | 600 × 600 × 2,000 / 600 × 800 × 2,200 | 6+ / 10+ kW | 4+ / 6+ kW | EER 3+, heat pipe 10+ |
48 V modules for a 19-inch rack: sodium NFPP for frost and daily cycling, lithium LFP for climate-controlled sites.
Batteries for the cabinet
Full catalog
Cabinet, power system and cooling specifications are manufacturer data; confirmed in the site-specific specification.
Request
Tell us about your sites
Number of sites, type (rooftop, ground, pole), climate, equipment load, how many operators share the site and what is installed today. We will reply with a cabinet configuration and pilot terms.